BSRT G-Jet® Official Factory Service Parts

If you're not running official factory BSRT G-Jet parts you're not racing a G-Jet. Listed below are all the factory service parts currently available for BSRT's #915 "G-Jet" and #915F "Formula G-Jet". All G-Jet parts and accessories are in stock ready for immediate shipment. If you have any questions about legality of parts for the G-Jet, please contact us at your convenience for more information.

 

#870 - G-Jet Stock Armature (each)
The stock original equipment 9-ohm G-Jet armature.
Designed to run perfectly in a #915 G-Jet or #915F Formula G-Jet on 12-volt power.
Price
$8.00
 

#874 - G-Jet Pickup Shoe Holders (pair)
The high-performance Pickup Shoe Holders that come supplied on all G-Jets.
These pickup holders are made from a special material that causes less electrical arcing.
Price
$3.00
 

#875 - G-Jet Pickup Shoes (pair)
The Pickup Shoes that come on every G-Jet that leaves the factory.
Designed with the perfect amount of travel when installed in the car.
Manufactured using a special material that creates less arcing.
Price
$1.50
 

#875-10 - Pickup Shoes (10 pair)
High-performance G-Jet Pickup Shoes sold in a less expensive 10-pack.
Price
$12.50
 

#877 - "Formula G-Jet" Front Axle Assembly (set)
The same official front axle assembly that comes supplied on all "Formula G-Jet" cars.
Includes precision-machined delrin front rims, wide Formula tires, and front axle.
This combination gives you a .350" diameter front tire as required at G-Jet racing events.
Price
$7.50
 

#878 - G-Jet O-Ring Front Axle Assembly (set)
A complete replacement G-Jet O-ring front axle assembly.
Includes precision-machined delrin front rims, O-ring tires, and front axle.
This combination give you a minimum front tire diameter of .350".
Price
$6.00
 

#879 - G-Jet Double-Flange Rear Rims (pair)
These are the precision-machined double-flanged rims that come on the current G-Jet.
These rims are made for use with BSRT's #880 injection-molded silicone slip-on rear tires.
The #879/880 rear wheel/tire combination gives you a .450" diameter when used together.
Price
$3.50
 

#880 - G-Jet Black Injection-Molded Silicone Rear Tires (pair)
High-performance silicone slip-on rear tires that come on the current G-Jet.
These high-tech tear-resistant tires will outlast any other silicone tire on the market.
Intended for use with #879 rims. Injection-molded out of an industrial strength black silicone.
 
Price
$5.00
 

#883 - G-Jet 7T Stock Pinion (each)
The stock G-Jet 7T plastic pinion as supplied on every G-Jet that leaves the factory.
Injection-molded out of a tough Nylatron material.
Price
$2.00
 

#884 - G-Jet 0-80 Brass Screws (2)
The same brass 0-80 screws used for the G-Jet handling plate holder (part #885).
Price
$2.00
 

#885 - G-Jet Brass Handling Plate Holder with 0-80 Screw (set)
G-Jet front brass handling plate holder along with brass 0-80 screw.
The Handling Plate Holder fits into the space in front of the G3 guide pin.
The supplied brass screw will hold your choice of .020" or .032" Brass Handling Plate.
Price
$4.00
 

#887 - "Formula G-Jet" .020" Brass Handling Plate (each)
Precision stamped .020" thick brass front handling plate with 0-80 threaded hole.
Allows use of the long wheelbase on the chassis to create a "Formula G-Jet".
Held in place by BSRT's #885 G-Jet Brass Handling Plate Holder.
Price
$4.00
 

#888 - G-Jet .032" Brass Handling Plate (each)
Precision-stamped .032" thick brass front handling plate with 0-80 threaded hole.
This front handling plate is used on the short wheelbase #915 G-Jet.
Held in place by BSRT's #885 G-Jet Brass Handling Plate Holder.
Price
$4.00
 

#891 - G-Jet .120" Brass Traction Weights (pair)
These precision machined brass traction weights fit all versions of the G-Jet.
Comes with plastic spacers for proper fit of brass weights in all G-Jets.
Price
$6.00
 

#895 - "Formula G-Jet" Complete Weight Handling Kit
Every chassis accessory included to create your own "Formula G-Jet" car.
Includes BSRT G-Jet part numbers 885, 887, and 891.
These chassis components are designed to fit BSRT's #962 Flexible G3 Chassis.
Price
$14.00
 

#897 - G-Jet G-Jet Complete Weight Handling Kit
Every chassis accessory included to create your own G-Jet car.
Includes BSRT G-Jet part numbers 885, 888, and 891.
These chassis components are designed to fit BSRT's #962 Flexible G3 Chassis.
Price
$14.00
 

#898 - G-Jet Plastic Spacer for use with Traction Weights (pair)
These spacers help locate the G-Jet #891 brass traction weights properly in the chassis.
Price
$2.00
 

#926 - G-Jet Timing Bracket (each)
A BSRT flexible timing bracket, the same part that comes on every G-Jet.
This injection-molded part holds the endbell in place and allows variable motor timing.
Price
$4.00
 

#933 - G-Jet Pickup Shoe Springs (2 pair)
These pickup springs provide the perfect balance between power and handling.
The spring wire diameter is .008" and is the same spring as supplied in every G-Jet car.
Price
$1.25
 

#937 - G-Jet Motor Bushings (pair)
The same stock bushings that come supplied in every G-Jet.
Price
$1.50
 

#941 - G-Jet Guide Pin (each)
The stock guide pin that comes on every G-Jet .
Precision machined out of steel, this is a direct replacement for the stock guide pin.
Price
$2.50
 

#953 - G-Jet Rear Axle (each)
The stock production rear axle that comes on every G-Jet.
Precision-ground to size with a splined section to secure the crown gear on the axle.
Price
$3.00
 

#962 - G-Jet "Flexible" Chassis with Traction Weight Clip (set)
This BSRT injection molded "Flexible" chassis forms the basis of all G-Jet cars.
Chassis includes a traction weight clip which holds the #891 traction weights in place.
Price
$6.95
 

#141 - G-Jet Hot-Stock™ Worked-up Armature
The stock 9-ohm G-Jet armature is "worked up" in the BSRT machine shop.
Features heated break-in cycle, a polished shaft, the commutator is polished, and the arm is balanced on BSRT's state-of-the-art dynamic balancer.
Price
$15.00
 

#290 - G-Jet C4 Ceramic-Grade Motor Magnets (pair)
The BSRT magnets that leveled the playing field for all G-Jets.
These magnets are precision compression-molded for uniformity in size and strength.
A direct replacement for the motor magnets that come in every G-Jet that leaves the factory.
Price
$10.00


BSRT Home Page

Question?  |  Order?  |  Home   |  AFX  |  Books  |   BSRT  |  Collectibles  |  Life-Like  |  Mattel   |  Parma  |  Racing

Copyright 2014, Scale Auto. All rights reserved.
No part of this web site may be reproduced or transmitted in any other form or means without the prior written permission of Scale Auto.