HOPAC General Rules (2007 season)
|
| 1) |
The maximum width
of any car is 1-5/16 inches (1.3125”). |
| 2) |
The maximum
allowable lateral movement of the front axle is 1/32 inch. |
| 3) |
After qualifying,
and during the race, any part of the car may be replaced except for the body, chassis, and
magnets (motor & traction). |
| 4) |
The body must be
a replica of an actual car and must be painted. |
| 5) |
Any body used
must cover the chassis when viewed from above (except through legal openings). |
| 6) |
Any car without a
body or with an interfering body will not be allwed to continue to run. |
| 7) |
Decisions
regarding rule interpretations will be made by the HOPAC Tech Committee. |
| 8) |
Cars may be
subject to a teardown to satisfy technical inspection. |