| HOPAC Super Stock Car Class Rules (2007 season) |
|
| 1) | Cars eligible to compete in this class include the BSRT G3-R©, BSRT G3©, BSRT Super G2©, BSRT 440-T2©, Tomy SRT car, and Tomy Super G-Plus car. |
| 2) | The motor and traction magnets shall be stock and made of a ceramic magnet material. The BSRT Super G2, Tomy SRT car, and Tomy Super G-Plus car may use their stock traction magnets only. The traction magnets shall be stock polarity. |
| 3) | Armatures shall be stock, narrow gap design, and be a minimum of 6.1 ohms. BSRT's "Hot Stock©", "Gold Power©", or "Platinum©" arms may be substituted for the stock unit. |
| 4) | All electrical system parts shall be stock or BSRT stock replacement. |
| 5) | The chassis shall be stock and cannot be modified in any way except for the following: a) Add body mounts. b) The pickup tabs on the chassis may be shortened, reinforced and/or replaced. c) The chassis may be modified to retain the rear axle. |
| 6) | The axles, gears, gear spacer (optional), guide pin, motor bushings, tires, and wheels shall be stock or BSRT stock replacement (no ball bearings allowed). |
| 7) | Vacuum-formed bodies may be used provided they meet all General Rules. |
| 8) | Glues/adhesives are not allowed on the chassis and bulkheads except to attach the body mounting system and retain the guide pin. |
Back to HOPAC Rules &
Regulations
|
Question? | Order? | Home | AFX | Books | BSRT | Collectibles | Life-Like | Mattel | Parma | Racing |
| This
page was last edited on: 12/19/07
|
Copyright 2007, Scale Auto. All rights reserved. No part of this web site may be reproduced or transmitted in any other form or means without the prior written permission of Scale Auto. |